MICRO-EPSILON colorSENSOR CFO Series Instruction Manual page 102

Anhang | API Communication with Controller (Version 0.7.1)
In the event of an error, the Status Code 400 (Bad Request) is returned as early as possible after recognition
of a permanent error status.
Error codes:
LPLC.format.malformed.upload
A 3.5.3.6 api/firmware/images/UUID
GET
Requests for information on a partially or completely transferred firmware image
The content of the status field is to be interpreted as follows:
incomplete:
complete:
invalid_signature:
processing_failure:
malformed_content:
device_mismatch:
Error codes:
LPLC.not_found.collection.item
colorSENSOR CFO
Number of bytes uploaded does not yet equal number of bytes predicted.
Image has been uploaded completely and can be used.
Erroneous check sum detected while uploading image.
Internal (undefined) error occurred while processing upload.
Uploaded image does not corresponded to expectations (e.g. erroneous check
sums).
Uploaded image does not contain any data to match sensor. The image was
probably intended for a different sensor (with a different sensor ID).
Page 102