Instructions For Operation; Cleaning; Warranty - MICRO-EPSILON colorSENSOR CFO Series Instruction Manual

Instructions for Operation

6.
6.1
We recommend cleaning the protective glass at regular intervals.
Dry Cleaning
This can be accomplished with an anti-static lens brush or by blowing off the glass with dehumidified, clean,
oil-free compressed air.
Moist Cleaning
Use a clean, soft, lint-free cloth or lens cleaning paper and pure alcohol (isopropanol) to clean the protective
glass.
Never use commercially available glass cleaner or other cleaning agents.
7.
All components of the device have been checked and tested for perfect function in the factory. In the unlikely
event that errors should occur despite our thorough quality control, this should be reported immediately to
MICRO-EPSILON Eltrotec.
The warranty period lasts 12 months following the day of shipment. Defective parts, except wear parts, will be
repaired or replaced free of charge within this period if you return the device free of cost to MICRO-EPSILON
Eltrotec. This warranty does not apply to damage resulting from abuse of the equipment and devices, from
forceful handling or installation of the devices or from repair or modifications performed by third parties.
MICRO-EPSILON Eltrotec is exclusively responsible for repairs.
No other claims, except as warranted, are accepted. The terms of the purchasing contract apply in full.
MICRO-EPSILON Eltrotec will specifically not be responsible for eventual consequential damages. MICRO-
EPSILON Eltrotec always strives to supply the customers with the finest and most advanced equipment. De-
velopment and refinement is therefore performed continuously and the right to design changes without prior
notice is accordingly reserved. For translations in other languages, the data and statements in the German
language operation manual are to be taken as authoritative.
colorSENSOR CFO
Instructions for Operation

Cleaning

Warranty

Page 86