Operation
5.4
Various key actions are shown below. The illustration of the LEDs reflects their state:
- Continuously illuminated or off.
- Flashing with various rhythms.
For operation, a keyboard is depicted at the left showing the current status of all indicators as well as any key
actuations. Key actuations are differentiated between
- short (pressing for less than two seconds) and
- long (holding down for two seconds or longer).
All descriptions start in the operating mode. If no learned colors are detected, the following illustration is typi-
cally applicable.
colorSENSOR CFO
Operation Using Foil Keyboard
The sensor is in the operating mode.
In the delivery state all outputs are set to high when a color is not de-
tected. For this reason the first three switching output LEDs illuminate on the
CFO100; on the CFO200 all switching output LEDs illuminate.
Page 36
Need help?
Do you have a question about the colorSENSOR CFO Series and is the answer not in the manual?
Questions and answers