Service, Repair; Decommissioning, Disposal - MICRO-EPSILON colorSENSOR CFO Series Instruction Manual

Service, Repair

8.
In the event of a defect on the sensor or optical
fiber, please send us the affected parts for repair or
exchange. In the case of faults the cause of which
is not clearly identifiable, the entire measuring sys-
tem must be sent back to:
9.
Incorrect disposal may cause harm to the environment.
colorSENSOR CFO
Service, Repair

Decommissioning, Disposal

Disconnect the power supply and output cable on the sensor. Remove the optical fiber from the sensor.
Dispose of the device, its components and accessories, as well as the packaging materials in compli-
ance with the applicable country-specific waste treatment and disposal regulations of the region of use.
MICRO-EPSILON Eltrotec GmbH
Manfred-Wörner-Straße 101
73037 Göppingen / Germany
Tel: +49 (0) 7161 / 98872-300
Fax: +49 (0) 7161 / 98872-303
eltrotec@micro-epsilon.de
www.micro-epsilon.de
Page 87