Enable Or Disable The Acknowledge All Alerts Display Command; Configure Security For The Display Menus - Emerson Micro Motion SGM Series Configuration And Use Manual

Configure device options and preferences
9.2 Enable or disable the Acknowledge All Alerts
display command
ProLink III
Field Communicator Configure > Manual Setup > Display > Display Menus > Acknowledge All
Overview
You can configure whether or not the operator can use a single command to acknowledge
all alerts from the display.
Procedure
1.
2.
9.3

Configure security for the display menus

ProLink III
Field Communicator Configure > Manual Setup > Display > Display Menus
Overview
You can control operator access to different sections of the display off-line menu. You can
also configure a passcode to control access.
Procedure
1.
88
Tip
Scroll Rate may not be available until you apply Auto Scroll.
Device Tools > Configuration > Transmitter Display > Ack All
Ensure that the alert menu is accessible from the display.
To acknowledge alerts from the display, operators must have access to the alert
menu.
Enable or disable Acknowledge All Alerts as desired.
Option Description
Enabled Default. Operators can use a single display command to acknowledge all alerts at
once.
Disabled Operators cannot acknowledge all alerts at once. Each alert must be acknowl-
edged separately.
Device Tools > Configuration > Transmitter Display > Display Security
To control operator access to the maintenance section of the off-line menu, enable
or disable Off-Line Menu.
®
Micro Motion Gas Specific Gravity Meters (SGM)