Status Alerts, Causes, And Recommendations - Emerson Micro Motion SGM Series Configuration And Use Manual

Troubleshooting
•
CAUTION!
If your meter is in a hazardous area, do not remove the meter housing cover. Use a different
method to determine meter status.
The status LEDs use colors and flashing to indicate device status.
Table 14-1: Transmitter status reported by status LED
LED state Description
Green No alerts are active.
Yellow One or more low-severity alerts are active.
Flashing yellow Calibration in progress, or Known Density Veri-
fication in progress.
Red One or more high-severity alerts are active.
Related information
14.6

Status alerts, causes, and recommendations

Table 14-2: Status alerts, causes, and recommendations
Alert number Alert title
A001 EEPROM Error
A002 RAM Error
152
A status LED on the board, beneath the meter housing cover
View and acknowledge status alerts
Possible causes
The transmitter has detec-
ted a problem communicat-
ing with the sensor.
The transmitter has detec-
ted a problem communicat-
ing with the sensor.
Recommendation
Continue with configuration or process meas-
urement.
A low-severity alert condition does not affect
measurement accuracy or output behavior.
You can continue with configuration or proc-
ess measurement. If you choose, you can iden-
tify and resolve the alert condition.
The low-severity alert condition does not af-
fect measurement accuracy or output behav-
ior. You can continue with configuration or
process measurement. If you chose, you can
identify and resolve the alert condition.
A high-severity alert condition affects meas-
urement accuracy and output behavior. Re-
solve the alert condition before continuing.
Recommended actions
• Cycle power to the meter.
• Contact Micro Motion.
• Cycle power to the meter.
• Contact Micro Motion.
®
Micro Motion Gas Specific Gravity Meters (SGM)