Display And Operation; Display; Keypad; Displays During Normal Operation - Emerson Rosemount Analytical FCLi Instruction Manual

MODEL FCLi

4.1 DISPLAY

4.2 KEYPAD

4.3 PROGRAMMING AND CALIBRATING THE ANALYZER - TUTORIAL
4.4 SECURITY
4.5 USING HOLD
4.1. DISPLAY
The Model FCLi analyzer has a two-line
display. The display can be customized
to meet user requirements (see Section
5.11). Figure 4-1 shows some of the dis-
plays. View A is the default screen for
Model FCLi-02 (chlorine and pH sen-
sor). View C is the default screen for
Model FCLi-01 (chlorine sensor only).
The FCLi analyzer has information
screens that supplement the data in the
main display. Press p or q to view the
information screens. The last informa-
tion screen is the software version.
During calibration and programming,
key presses cause different displays to
appear. The displays are self-explanato-
ry and guide the user step-by-step
through the procedure.
4.2 KEYPAD
Figure 4-2 shows the keypad.
SECTION 4.0

DISPLAY AND OPERATION

FIGURE 4-1. Displays During Normal Operation
Screen A shows chlorine and pH. The temperature shown is the tempera-
ture measured by the chlorine sensor. Screen B shows chlorine and pH
and the temperature measured by each sensor. Screen C shows the data
for the chlorine sensor only.
Four arrow keys move the cursor around the screen. A blinking word or
numeral show the position of the cursor. The arrow keys are also used to
change the value of a numeral. Pressing ENTER stores numbers and set-
tings and moves the display to the next screen. Pressing EXIT returns to
the previous screen without storing changes. Pressing MENU always
causes the main menu screen to appear. Pressing MENU followed by
EXIT causes the main display to appear.
FIGURE 4-2. FCLi Analyzer Keypad
SECTION 4.0
DISPLAY AND OPERATION
11