14.25
Locate a device using the HART 7 Squawk
feature
The Squawk feature causes the device to show a specific pattern on its display. You can use
this to locate or identify a device.
Restriction
The Squawk feature is available only with HART 7 connections. It is not available with ProLink III.
Procedure
1.
2.
An 0-0-0-0 pattern is shown on the display.
To return to the normal display, activate either Scroll or Select, or wait 60 seconds.
Configuration and Use Manual
Choose Service Tools > Maintenance.
Click Locate Device, then click Next.
Troubleshooting
171