Ultrasound Patient Preparation; Preparing Treatment Area; Size Of Applicator; Applicator Preparation - Chattanooga Intelect Advanced Therapy System Manual

PATIENT PREPARATION

ULTRASOUND PATIENT PREPARATION

Preparing Treatment Area

Examine the skin for any wounds and clean the skin.

Size of Applicator

View the Sound Head Recommendation in the Treatment
Review screen for Ultrasound (as a reference point only) prior to
administering treatment.
Sound Heads are available in the sizes shown below.
2 2
1 CM 2 CM

Applicator Preparation

Clean applicator before each therapy session with warm soapy
water.
2
5 CM
2
10 CM
STANDARD

Conductive Medium

Liberally apply Conductor™
Transmission Gel or equivalent to
the treatment area on the patient.

Treatment Area

Move the Sound Head during
therapy session in a circular
motion. The area treated should
be two times the diameter of the
Sound Head.

Applicator Coupling

If US Coupling is On, the Sound
Head is properly coupled to
the patient and administering
ultrasound when the LED is
constantly illuminated
NOTE:
Refer to page 29 for US Coupling
settings.
39
Intelect® Advanced Therapy System
APPLY
CONDUCTIVE GEL
COUPLING
INDICATOR
LED
Supplied by EME Services Ltd