Dura-Stick™ Electrode Instructions; Connecting Lead Wires; Securing Electrodes - Chattanooga Intelect Advanced Therapy System Manual

PATIENT PREPARATION
ELECTROTHERAPY PATIENT PREPARATION (continued)
Dura-Stick™ Electrode Instructions

Connecting Lead Wires

Insert the lead with the Red (+) electrode
connector into one Dura-Stick Electrode.
Insert the lead with the Black (-) electrode
connector into the other electrode.
Make certain the lead wires are
seated completely into the electrodes.
NOTE:
Use of conductive medium or sponges is
not required or recommended. Dura-Stick
Electrodes are manufactured to ensure
the optimum conductivity during therapy
when properly applied.
LEAD WIRE SEATED
RED +
LEAD WIRE

Securing Electrodes

Remove the Dura-Stick Electrodes from
the protective backing and apply to the
treatment area as prescribed. Ensure the
entire electrode surface is in contact with
patient skin by pressing into place.
BLACK 
LEAD WIRE
37
Intelect® Advanced Therapy System
Supplied by EME Services Ltd