Chattanooga Intelect Advanced Therapy System Manual page 116

TROUBLESHOOTING
ERROR CODES (continued)
Code Type
Number Message
135 Warning Control Board Software upgrade warning.
136 Warning Stim Board Main Software upgrade warning.
137 Warning Stim Board Main Software upgrade warning.
138 Warning Ultrasound Board Software upgrade warning.
139 Warning Laser Board Software upgrade warning.
140 Warning MMC Software upgrade warning.
141 Warning Battery Module Software upgrade warning.
142 Warning A Laser Protocol was selected, but no Laser Module is installed
on system.
143 Warning A Laser Protocol was selected, but no Laser Applicator connected
to system.
Probable Cause
111
Possible Remedies
Upgrade Control Board Software to latest version. Contact dealer or Chattanooga Group for latest
software upgrade and instructions.
Upgrade Stim Board Software to latest version. Contact dealer or Chattanooga Group for latest
software upgrade and instructions.
Upgrade Stim Board Software to latest version. Contact dealer or Chattanooga Group for latest
software upgrade and instructions.
Upgrade Ultrasound Board Software to latest version. Contact dealer or Chattanooga Group for
latest software upgrade and instructions.
Upgrade Laser Board Software to latest version. Contact dealer or Chattanooga Group for latest
software upgrade and instructions.
Upgrade MMC Software to latest version. Contact dealer or Chattanooga Group for latest software
upgrade and instructions.
Upgrade Battery Software to latest version. Contact dealer or Chattanooga Group for latest
software upgrade and instructions.
Install Laser Module to Therapy System. Refer to Laser Module User Manual for installation
Instructions.
A. Connect proper Laser Applicator to the system.
B. If Laser Applicator is connected, reset Therapy System by turning main power switch
Off and On.
C. Connect a known good Laser Applicator.
D. If problem continues, send Laser Module to Factory for service.
Intelect® Advanced Therapy System
Supplied by EME Services Ltd