Changing Data; Changing A Text Value; Infinitely Variable Change Of Numeric Data Value - Danfoss VLT Brook Crompton Motor FCM 300 Design Manual

Programming
When the desired parameter group has been selected,
each parameter can be selected with the [+]/[-] keys:
FREQUENCY
50.0 Hz
001 LANGUAGE
ENGLISH
Illustration 3.9
The 3rd line of the display shows the parameter number
and name, while the status/value of the selected
parameter is shown in line 4.

3.1.16 Changing Data

Regardless of whether a parameter has been selected
under the Quick menu or the Menu mode, the procedure
for changing data is the same. Pressing [Change Data] key
gives access to changing the selected parameter, following
which the underlining in line 4 will flash on the display.
The procedure for changing data depends on whether the
selected parameter represents a numerical data value or a
text value.

3.1.17 Changing a Text Value

If the selected parameter is a text value, the text value is
changed by means of the [+]/[-] keys.
FREQUENCY
50.0 Hz
001 LANGUAGE
ENGLISH
Illustration 3.10
The bottom display line shows the text value that will be
entered (saved) when acknowledgement is given [OK].
®
VLT DriveMotor FCM Series
3.1.18 Infinitely Variable Change of
If the selected parameter represents a numeric data value,
a digit is first selected by means of the [<][>] keys.
Illustration 3.11
Then the selected digit is changed infinitely with the [+]/[-]
keys:
Illustration 3.12
The selected digit is indicated by the digit flashing. The
bottom display line shows the data value that will be
entered (saved) when signing off with [OK].
®
MG03BA02 - VLT is a registered Danfoss trademark
Numeric Data Value
FREQUENCY
50.0 Hz
130 START FREQUENCY
09.0 HZ
FREQUENCY
50.0 Hz
130 START FREQUENCY
10.0 HZ
3 3
SETUP
1
SETUP
1
33