Danfoss VLT Brook Crompton Motor FCM 300 Design Manual page 50

Programming
5000 HZ
Function:
In this parameter, the signal value is set that corresponds
to the maximum reference/feedback value set in parameter
205/415.
3 3
Description of choice:
Set the desired pulse frequency.
331 Terminal 1, analogue input current
Value:
No operation (NO OPERATION)
Reference (REFERENCE)
Feedback (FEEDBACK)
Function:
This parameter allows a choice between the different
functions available for the input, terminal 1.
48
®
VLT DriveMotor FCM Series
Scaling of the input signal is effected in parameters 336
[5000]
and 337.
Description of choice:
[0] No operation. Is selected if the FC motor is not to react
to signals connected to the terminal.
[1] Reference. Is selected to enable change of reference by
means of an analogue reference signal.
If other inputs are connected, these are added up, taking
account of their signs.
[2] Feedback. Is selected if closed loop regulation with an
analogue signal is used.
[0]
[1]
332
[2]
333
334
335
®
MG03BA02 - VLT is a registered Danfoss trademark
Terminal 2, analogue/digital input
Terminal 3, digital input
Terminal 4, digital input
Terminal 5, digital input