Project Tools - Brainchild PR10 User Manual

Discrete Discrete
Value for Value for
Band1 Band2
False True
False False
False False
False False
True True
False True
True False
False False

6.3.9.5 Project Tools

6.3.9.5.1 Build
Once the project is compiled successfully, it creates a build. This build then needs to be
transferred to the Recorder. If there are any errors during the preparation of the build, it will be shown in the
output window just below the screen working area. If the Output screen is not visible below the screen
working area, select it via Menu, "View", and then click "Output" or apply "Reset window layout" from the
Menu-"View"
After creating a build, if any errors are shown at Output window, do not attempt to download the
application from PC to Recorder, or PC to USB flash disk first clear the errors and make sure that
compilation errors are not present before transferring the application to the Recorder.
6.3.9.5.2 Build & Offline Simulation
First, it creates a build, then runs an Offline simulation.
Discrete Discrete
Value for Value for
Band3 Band4
False False
True False
False True
False False
True True
True True
False False
False False
Page 386 of 479
Discrete
Appearance of
Value for
Component
Band5
False Shaded Yellow (Band2)
False Original (Band 3)
False Shaded Orange (Band 4)
Blink Shaded Black (Band
True
5)
True Blink Shaded Red (Band 1)
True Shaded Yellow (Band 2)
True Blink Shaded Red (Band 1)
False Original (No bands active)