Table of Contents
Advertisement
5.10.3.2 Password validity
The user can configure the validity of the password for a period. The available options are 30
days, 60 days, 90 days and unlimited.
5.10.3.3 Security Level of Functions
There are different level of security can be configured for different function. The security level
can be configured from 1 to 9. In this 9 is the highest level and 1 is the lowest level. The different functions
can be configured with different security levels are listed as below.
1. Login from PC
2. Dump
3. Clear
4. Operate
5. Config
6. Pause
7. Batch
8. Shutdown
5.10.4 Batch Control
The batch function can be enabled or disabled.
Note: It is necessary to restart the recorder after changing the batch control.
5.10.5 Volume
The buzzer volume of the recorder can be disable or can be set from 1 to 10. The buzzer can be
disabled by configuring Volume as Disable.
5.10.6 Tool Bar
The drop down menu of menu
inactivity. The inactivity time can be configured by configuring 10Sec or 20Sec or 30Sec in Auto Hide. If
Auto Hide is configured with disable then the drop down menu will not hidden.
5.10.7 Scan Page
The configured displayed pages can be scrolled automatically after a period of idle time
configured in Idle Time with a constant interval configured in Scan Rate. The idle time can be configured
from 1 Min to 10 Min and Scan rate can be configured from 5 sec to 30 sec. The scrolling of pages can be
disabled by configuring Idle Time as Disable.
5.10.8 LCD
The LCD Brightness can be configured from level 0 to 6. The level 0 is the lowest brightness and
level 6 is for the highest possible brightness.
The life time of LCD can be increased by configuring screen saver to turn off the display after a
period of inactivity on the screen. During the screen saver mode the data will be recorded continuously
without any loss. The LCD screen only be off at that time. The screen saver time can be configured from 1
Min to 60 Min. The screen saver can be disabled by configuring Disable in Screen saver.
5.10.9 Storage
The external storage type can be chosen from the available options SD Card or USB Disk. The
default setting for external storage set as SD card. The maximum size of external memory supported is
32GB. The external storage must be formatted in FAT or FAT32 format.
key can be hidden automatically after a period of
Page 193 of 479
Advertisement
Table of Contents
