6.2.3.7 PR-DAQ RS485 Communication
The recorder can be connected to real time viewer software using RS232 or RS485 port of
recorder and PC by following the below procedure.
1. Save the PR Configuration to the SD card or USB Disk depends on the selection of External
Storage in Instrument Menu.
2. Press the Save Button on the Configuration page to Save the PR Configuration to the SD card or
USB Disk
3. Remove SD card or USB Disk from PR
4. Connect the SD Card or USB Disk to PC.
5. Open Real time Viewer in DAQ Software
6. Set the Bank and PR Communication Parameter properly for RS485 Communication.
Page 274 of 479