Table of Contents
Advertisement
5.15 Calibrate
This function is used for calibrating Individual Analog channel. This can be protected by
password. . After entering the Configuration menu, select Calibrate then Press the Enter key to get into
Calibration menu. Press directional keys
column. After completing Configuration, press
return to main display. All configurations will be saved automatically.
The Calibration must be carried out by a qualified personnel only with proper instruments. The
system will show the warning message as shown below when the user is accessing the calibration menu.
After Entering the calibration menu the screen shows the below screen.
Type: Channel is shown as Type always
on the right hand side to select the menu
soft key, then press
Page 207 of 479
soft key to
Advertisement
Table of Contents
