Table of Contents
Advertisement
Write design time value: If selected, it writes value available at "Text" during design time and
Rounding: Rounds to nearest value
Decimal: Enter the number of decimal points
Value: Current Tag value. It is used to enter a value during design time and to check how a
value is displayed during Run time.
Increment: Value to be incremented during Run time after pressing Up/Down button.
Minimum: Defines the minimum value
Maximum: Defines the maximum value
Soft keyboard
If enabled, it is possible to control the keypad appearance during run time. For example, if
alignment is selected as Middle center, then, when keypad appears in run time, it will be located to Middle
center in screen
Events
Defines events to be executed when the operator presses the Up/Down arrow and changes the
value during Run time.
6.3.9.1.10 Digital LED
This object is used to view a process value in a digital format. Generally, it is linked with an
analog type tag (example: an analog input tag at a PLC, which is received as 4-20 mA signals from field
transmitters to define things like Temperature, Pressure, Flow, Level, Position etc...)
also during run time replacing the default value defined in the Tag data
base.
Page 327 of 479
Advertisement
Table of Contents
