Table of Contents
Advertisement
CopyBlockfromTagBtoTagA: Used to copy a block of tags from TagB to Tag1
For example: Copy 4 continuous tags from Tag5 to a target location starting with Tag1. Tag5 is
copied to Tag1, Tag6 is copied to Tag2, and so on.
Note: Maximum block size is limited to 80 tags
EditValuetoTag: Used to edit tag value during run time from a keypad. For example, if this
function is called from button "clicked" event, then, a keypad will open during
run time and the user can enter a set point.
TurnBitOn: Used to turn on a bit.
If a momentary Turn on is required, then in "Clicked" action, select Turn On, then, in "Released"
action, select "Turn OFF".
TurnBitOFF: Used to turn off a bit
Togglebit: Used to toggle the bit
Page 314 of 479
Advertisement
Table of Contents
