Analog Output Cards (Ao206); Pid Process Control Module (Pc201) - Brainchild PR10 User Manual

2.3.5 Analog output cards (AO206)

These cards are 6-channel analog output cards. They are used to retransmit process values to
other devices like meters, controllers, etc. The configuration Menu can be reached by pressing Menu and
then pressing more and then pressing Config key. It will display a tree type configuration layout for easy
user configuration. By using Up/Down Key and Enter Key, AO configuration window can be reached. In this
window the user can configure the AO parameters. The user can select the desired output type and other
parameters for analog output in this window.
Note: There is dip switch on the AO206 card to select the current or voltage output for each
channel.

2.3.6 PID Process Control Module (PC201)

This is a single loop PID Control Module which consists of Universal Input. The Module output
can be configured by using the configuration Menu. The configuration Menu can be reached by pressing
Menu and then pressing more and then pressing Config key. It will display a tree type configuration layout
for easy user configuration. By using Up/Down Key and Enter Key, PID Controller and Profile configuration
window can be reached. In this window the user can configure the Controller parameters and profiles of PID
Control Module. The user can select the desired output type and other parameters for analog output in this
window.
Page 45 of 479