Table of Contents
Advertisement
End Position: Define X and Y coordinate for end position when tag value is at its max. During
The X position indicates movement from Left to Right, this is Horizontal movement. The Y
position indicates movement from Top to Bottom, this is Vertical movement.
installation, Horizontal (Left to Right) = 800 pixels, Vertical (Top to Bottom) = 480 pixels
Tag value = 100, the position of the line will be at the Top Right
Size
Select "Enable Size" check box to enlarge/decrease size of component during Run time.
Start Size: Defines X and Y coordinates for the starting size when the tag value is at its
End size: Define X and Y coordinate for end size when tag value is max. Run time.
Tag Value
Select a Tag to be linked with this line. This is useful if animation is required to be done on the
line.
Bands
This is to select various bands as part of an animation during Run Time
Band Count
A maximum of 32 bands are available.
For example: In the above sample,
If the Tag value is 0 to 20, the line will be Yellow
If the Tag value is 21 to 80, then, line color = Green
If the Tag value is above 80, line color = Red
6.3.9.1.4 Polygon
Polygon: Used to draw a polygon. After finishing drawing, double left-click the polygon using the
mouse to complete the Polygon. It is also possible to link a polygon to a tag and define some user friendly
animation to appear during Run time.
run time.
For example: Recorder 7" (High Performance) project, 800 X 480 pixels, Normal
Enable move: Selected
Start position X = 0, Y = 0
End position X = 800, Y = 0
Tag Value, From = 0, Tag Value To = 100
Now, in Run time, when the Tag value = 0, the line will be at the Top left. When the
minimum during Run time.
Page 318 of 479
Advertisement
Table of Contents
