Table of Contents
Advertisement
This is the method of logging measured data. Select the column Method and press Enter. Then
choose the required Log method from the available methods Instant, Average, Minimum or Maximum of
data.
5.2.3.5.3.1 Instant
Logging the last measured data at the logging interval
5.2.3.5.3.2 Average
Logging the averaged of sampled measured data at the logging interval
5.2.3.5.3.3 Minimum
Logging the minimum of sampled measured data at the logging interval
5.2.3.5.3.4 Maximum
Logging the maximum of sampled measured data at the logging interval
5.2.3.5.4 Speed
It is the logging speed (recording speed) of measured data. The available log speeds are as
below.
5.2.3.6 Modbus
The scaling of the channel value in Modbus communication.
5.2.3.7 Events
Events are frequently used for Alarm purposes. The events can be used to operate digital
outputs (DO), Timer, Totalizer, Counter or Report. There are maximum five events can be added to each
analog input.
Press "Add" to add new event and Press "Remove" to remove selected event
5.2.3.7.1 Type
There are various types of events are available for the user to select for job or alarm purpose.
They are listed as below.
5.2.3.7.1.1 H
1. 100 msec/dot
2. 1 Sec/dot
3. 2 Sec/dot
4. 5 Sec/dot
5. 10 Sec/dot
6. 15 Sec/dot
7. 20 Sec/dot
8. 30 Sec/dot
9. 1 min/dot
10. 2 min/dot
11. 5 min/dot
12. 15 min/dot
13. 1 hour/dot
14. 2 hour/dot
Page 132 of 479
Advertisement
Table of Contents
