Table of Contents
Advertisement
Remove stains from this equipment using a soft, dry cloth. Do not use harsh chemicals, volatile
solvents such as thinner or strong detergents to clean the equipment in order to avoid deformation.
If the equipment is used in a manner not specified by the manufacturer, the protection provided by the
equipment may be impaired.
2.1 Unpacking
Upon receipt of the shipment, remove the recorder from the carton and inspect the unit for
shipping damage. If any damage is found, contact your local representative immediately. Note the model
number and serial number for future reference when corresponding with our service centre. The serial
number (S/N) is labelled on the box and the housing of the recorder.
The recorder is designed for indoor use only, and is not intended for use in any hazardous area.
It should be kept away from shock, vibration, and electromagnetic fields (such as variable frequency drives),
motors and transformers. It is intended to operate under the following environmental conditions.
Environmental Parameter
Operating Temperature
Humidity
Altitude
Pollution Degree Level II
Power
2.2 Dimensions
2.2.1 Panel mounting style
2.2.1.1 PR10
Specification
0°C to 50 °C
20% to 90% RH(Non-condensing)
2000 M Maximum
IEC1010-1(EN61010-1)
90 ~ 250 VAC, 50/60 Hz or 11-36VDC
Page 34 of 479
Advertisement
Table of Contents
