Table of Contents
Advertisement
5.8.2 Time Zone
Select the time zone for the recorder
5.8.3 Synchronize via Internet
This will allow the recorder to synchronize the clock time from time server via Internet connection
on the recorder. If this option is enabled then the recorder will connect with Time server every day at the
defined time to synchronize the clock.
5.8.4 Date / Time
This will allow the user to set the clock manually. After modifying the clock data press
apply the modified time.
5.8.5 Summer time
In some countries of North America and Europe, clocks are adjusted forward one hour near the
start of spring and are adjusted backward in autumn. This is commonly referred to as Daylight Savings
Time. Here it is referred as Summer Time. The summer time can be enabled by selecting enable in the
Type and configuring From and To time.
5.9 Communication
This will allow the user to configure the communication related parameters. After entering the
Configuration menu, select Communication then Press the Enter key to get into Communication
configuration menu. It displays the communication configuration menu to configure. Press directional keys
on the right hand side to select the menu column. After completing Configuration, press
soft key, then press
automatically.
5.9.1 Ethernet
This will configure the Ethernet port configuration.
IP
Select the IP type as Static or DHCP as per the requirement. Select DHCP if the server on the
network automatically allocates the IP address for the recorder. Select STATIC to manually set a fixed
address for the recorder.
soft key to return to main display. All configurations will be saved
Page 175 of 479
to
Advertisement
Table of Contents
