Serial; Modbus Server / Slave; Modbus Client/Master; Connections - Brainchild PR10 User Manual

Paperless recorder
Hide thumbs Also See for PR10:
Table of Contents

Advertisement

IP Address: Defines the IP address of the recorder on the network
Subnet Mask: Defines the Subnet Mask address on the network
Default Gateway: Defines the Gateway address.
DNS Server: This is required if the recorder needs to be connected to Internet
Modbus Server: When Recorder is configured as Slave Recorder (Server in Modbus TCP) in
Modbus communication, the recorder needs to be configured with the port no.
Modbus TCP Port: Modbus TCP Port no. Default setting is 502 for Modbus TCP
Web Server: This will allow the user to enable or disable the web server feature on the recorder.

5.9.2 Serial

This will configure the serial port of the recorder.
Protocol: Selects the Modbus protocol. The available options are Modbus RTU Master and
Address: Recorder Slave Address in the network
Baud rate: Selects the communication baud rate for communication. The available options are
Data format: Selects the communication data format for communication. The available options

5.9.3 Modbus Server / Slave

This will allow the user to select the data type for the recorder communication when it act as a
slave in Modbus RTU or server in Modbus TCP.
Type of Register Value: The user can select the data type as Integer or Floating point.

5.9.4 Modbus Client/Master

This will allow the user to configure the external channel communication with recorder.

5.9.4.1 Connections

Add the connections to the recorder. There are maximum of 16 devices can be connected with
PR10 and PR20 and maximum of 32 devices can be connected with PR30. To add a connection select
connections and then press Enter key. It will show the connection menu parameters.
Name: Configure the connection name
Type: Select the connection type as Serial or Ethernet
Slave ID: Configure the Slave Id of the device to be connected.
IP: This is enabled only if Type = Ethernet. Configure the IP address of the slave.
Port: This is enabled only if Type = Ethernet. Configure the port no of the slave.
Modbus RTU Slave.
9600, 14400, 19200, 38400, 57600, 115200
are none, 8, 1 or Odd, 8, 1 or Even, 8, 1
Page 176 of 479

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pr20Pr30

Table of Contents