Table of Contents
Advertisement
Scale:
Maximum: This is maximum range of Set point (Analog Tag, Normally Analog Output).
Minimum: This is minimum range of Set Point (Analog Tag, Normally Analog Output).
Example: If Controller set point is 0 to 100。C, set Minimum = 0, Maximum = 100.
Reverse Scale: If Selected, Scale labels will be displayed in Reverse.
Behaviour:
Step: It is the minimum value change when the slider is moved.
For example: By default, Step = 0, i.e., Slider moves its position in Real time even with minor
For example: If Step = 5, Slider moves its position in Real time in steps of 5.
Value: It is used to enter process value in design time and check the Slider position in PC.
Indicator only: If Indicator only is selected, slider is used for Read only. Operator will be not
Value Position: Define position for the value to appear during Run time. Available options
Sections colors: It is configure bands for the sections to show different colors for Labels and
Ticks in Slider.
Example: Three bands
change in process value.
able to move slider in Run time. If Indicator only is not selected, the slider is
used for Read/Write. Operator will be able to move slider in Run time for
example: change set point for variable speed drive.
include Top left, Bottom Right, Both, Internal and None.
Page 363 of 479
Advertisement
Table of Contents
