Table of Contents
Advertisement
6. Simulate Channels to simulate the input signals by the software
All the channel configurations are similar to recorder channel configuration. Every channel can
be configured with 5 different types of events or alarms similar to recorder and each event can be
configured with two jobs.
Device Type
:
Bank
Display current Bank number
:
Tag Name
It is to define the name for each channel in maximum 9 characters
:
Auto-Update
:
Use Gateway-Device Node address
IP address
Display current gateway IP address
:
Log Type: Enable/Disable. Select disable while a specific channel is not required at this time.
Select enable while a specific channel is required
Log Speed: It is the logging speed (recording speed) of measured data. Select Log Speed
column, then choose 1, 2, 5, 10, 15, 20, 30 seconds, 1,2,5,10,15 Minutes, 1 Hour, 2
Hour.
Log Method: The method of logging measured data. Select the column, and then choose the Log
Instant: logging in the last measured data at the sampling interval
Average: logging in averaged measured data at the sampling interval
Display channel source
If you wish to modify Tag name and modify configuration, deselect it
method of Instant, Average, Minimum or Maximum data
It is address of selected device type
:
Page 259 of 479
Advertisement
Table of Contents
