Start/Stop Profile (Ramp &Dwell) - Brainchild PR10 User Manual

5.2.5.5 Start/Stop Profile (Ramp &Dwell)
The Profile can be start, Hold or stop from the Real time display page of process control module.
The Profile can be selected and run from the Run button on the display page. Press Run and select the
profile to be run then press ok to start the Profile.
Press Hold to hold the profile. Press Stop to stop the Profile.
The real time display page will show the Profile and Segment no along with the remaining time
of that particular segment.
Page 158 of 479