Table of Contents
Advertisement
5. Display
6. Print auto-output
7. User Manage
8. The display of AI serial for IO Modules (only for IO Modules)
9. Auto start project
1. Share
The share menu will allow the user to configure for share or not to share the data
with others.
Share/do not share options are available for user selection. If share option is
selected, then historical data available in the computer can be shared from other computers.
On selection of this share data, shared folder will be created and following message will be
shown
For example, the recorder is connected to PC with real time viewer and wish to
analyse historical data at different computer. While opening project in the second
Computer, directly link to the project file available under C:\Data Acquisition Studio
through network configuration. This will minimize the data transfer between Modbus slaves
and the computers and make it more efficient by using available resources through network
Configurations.
2. Email
The Email menu will allow the user to configure the email server to send email on
an event or alarm. The default Port number 25 is used to send email from SMTP server. If
network administrator configured different port in LAN for accessing internet/email, then the
user has to modify the port number accordingly.
To send an email for any event, the procedure is as follows.
❖ Set SMTP server details as below. Please contact system or network
administrator for the server details if the computer is connected in LAN.
❖ Host, Port, User name,
❖ From: Sender email address
❖ To: Receiver email address (Max.10 email addresses can be selected)
Page 252 of 479
Advertisement
Table of Contents
