Table of Contents
Advertisement
Now the Screen will appear like below
Format:
Press the Format Button for at least 3 Seconds to return the Recorder to factory Settings.
After the Recorder is done formatting, it will ask for Screen Calibration. Do the Screen Calibration by
touching the '+' symbol on the screen. Repeat the step of calibration as long as the symbol '+' moves on the
screen. Once the calibration is finished touch the screen to exit. The recorder has now been returned to
factory default settings.
Upgrade:
Download the Firmware from the link given. Generally the file will be compressed. The
compressed file needs to be unzipped then copy the file Recorder_PV210.BIN to the main path of SD Card.
Ensure that the SD card is formatted to FAT32 or FAT. Insert the SD Card to the SD Card Slot on the
Recorder. Press Upgrade Button for at least 3 Seconds to upgrade the image from SD Card.
Follow the on-Screen instructions.
After the Recorder is done upgrade, it will ask for Screen Calibration. Do the Screen Calibration
by touching the '+' symbol on the screen. Repeat the step of calibration as long as the symbol '+' moves on
the screen. Once the calibration is finished touch the screen to exit the calibration mode and enter into the
recorder application.
Page 224 of 479
Advertisement
Table of Contents
