Table of Contents
Advertisement
5.3.10 Enable Timer
Start the timer, and then select Target timers
5.3.11 Disable Timer
Stop the timer, and then select Target from Timers
5.3.12 Preset Totalizer
Set a pre-set value to the target Totalizer.
5.3.13 Reset Totalizer
Reset Totalizer to zero. Select a single Target Totalizer or All totalizers
5.3.14 Enable Totalizer
Starts the Totalizer. Select a single Target Totalizer or All totalizers
5.3.15 Disable Totalizer
Stops the Totalizer. Select a single Target Totalizer or All totalizers
5.3.16 Preset Counter
Set a pre-set value to the target counter.
5.3.17 Reset Counter
Resets the counter to zero. Select a single Target counter or all counters
5.3.18 Inc Counter
Increases the counter by 1. Select a Target counter or all counters
5.3.19 Dec Counter
Decrease the counter by 1. Select a Target counter or all counters
5.3.20 Log Report
Log a report for the selected channels. The options available to select for the report are
Counter, Totalizer, Analog inputs (Min/Max/Avg), Math (Min/Max/Avg), All Counters, All Totalizers, and All
Channels (Min/Max/Avg).
5.3.21 Reset MinMaxAve
Reset the minimum, maximum and average values of the previously sampled data. The
statistical data will calculate from the new sample of reports.
5.3.22 Print Historical data
Prints the historical data. The period of data to be printed will follows the configuration in Auto
output menu.
5.3.23 Print Event List
Prints the historical event list. The period of data to be printed will follows the configuration in
Auto output menu.
5.3.24 Print Report List
Prints the historical data of log report data. The period of data to be printed will follows the
configuration in Auto output menu.
Page 161 of 479
Advertisement
Table of Contents
