Table of Contents
Advertisement
Minimum: This is the minimum range of Process Value (analog input tag)
Example: If an Ear Level transmitter range is 0 to 100, set Minimum = 0, Maximum = 100.
Reverse Scale: True/False. If it is selected, then, zero will be on bottom side and 100 will be at
Step: This is the minimum value to reflect change in Bar graph position. Bar Step and Bar
division settings are closely related. If Bar divisions = 50 for a scale value of 0-100, then, if
Step=2, when process value changes by value 2, it shows level value change clearly in
level graph.
Value: Used to enter a process value during design time and to check the bar graph display on
the PC. It requires the operator to enter a value in multiples of the step value.
Otherwise, it is automatically rounded to the closest multiple of the step value.
Is Indicator only: If this is selected, the level graph is used for "Read" purposes only. If it is not
Value Position: Define position of process value to be displayed during Run time along next to
Sections colors: It is configure bands for the sections to show different colors for Labels and
Example: Three bands
Section 1, Max % = 60 means, its band is from 0 to 60 %, and it will show labels and ticks in black color.
Section 2, Max % = 80 means its band is from 61 to 80 %.
Section 3, Max % = 100 means its band is from 81 to 100 %.
Note: Band setting is in % for the total Scale defined (Minimum to maximum).
top side for vertical orientation.
selected, you can use a level graph for write purposes similar to slider to send
a set point from the Recorder to a PLC etc. Just use finger to touch at various
places in Level graph to set the level required.
the Level graph. Available options include None, Top Left, Bottom Right and
Both.
Ticks in Level graph.
Page 355 of 479
Advertisement
Table of Contents
