Names Of Parts And Their Functions; Front Control Panel - Ikegami HQLM-1720WR Operation Manual

HQLM-1720WR

2 Names of parts and their Functions

2-1 Front Control Panel

POWER switch
This switch is used to turn ON/OFF the monitor.
* This switch will not fully turn OFF the AC power
supply for the monitor.
* It takes several seconds for an image to come up
after power-on.
POWER LED
This LED is lit up in green when the power supply
for the monitor is ON.
MENU switch
This switch is pressed to display the menu screen
and to change the menu screen.
* This switch is disabled when the preset menu is
displayed.
PRESET switch
This switch is pressed to display the preset menu.
* This switch is disabled when the menu is dis-
played.
ENT switch
Press this switch to execute menu operations.
ESC switch
This switch is pressed to escape from menu op-
eration.
(UP)/ (DOWN)/
Use this switch to change menu items or the
setting of each item when a menu or preset menu
is displayed.
With the menu off and the marker on, the image
pattern can be preset with the
and the safety marker area with the
switches in the range of 80-99%
(RIGHT) switch
(LEFT)/
and switches
and
INPUT SELECT switch
Use the and
sources.
The switching method changes depending on the
VIEW MODE setting in the menu.
[4K MODE]:
CH-A1/CH-B1/CH-B1 4(QuadLink4K)/HDMI
[2K MODE]:
CH-A1/CH-B1/CH-B2/CH-B3/CH-B4/HDMI
[MULTI MODE]: Can not select.
For VIEWMODE, refer to "4-2 Functions of
4K/2K MULTI."
CH-B switch
Use this switch to change channels in the SDI
input mode.
The way of switching changes by the VIEW-
MODE setting in the menu.
[4K MODE] CH-A1/CH-B1 B4
[2K MODE] CH-A1/CH-B1
[MULTI MODE] Can not select.
For VIEWMODE, refer to "4-2 Functions of
4K/2K MULTI."
- 4 -
switches to change input