Names Of Parts And Their Functions; Front Controller Parts - Ikegami HLM-3250W Operation Manual

2. Names of parts and their Functions

2-1. Front Controller Parts

26
SDI ERRO R
1 2 3
MENU PRESET
ENT ESC
SDI ERROR
22 23 4 5
① POWER switch
Turns on/off the power to the monitor.
※This switch is not for turning on/off the AC power
supply to the monitor.
※Several seconds are required for images to appear
after power-on.
② MENU switch
Press this switch to display a menu screen or
change the menu screen.
※This switch is disabled when the preset menu is
displayed.
③ PRESET switch
Press this switch to display the preset menu.
※This switch is disabled when the menu is displayed.
④ ENT switch
Press this switch to execute menu operations.
⑤ ESC switch
Press this switch to exit from a menu.
⑥ ▲ (UP)/ ▼ (DOWN)/
Use this switch to change menu items or the setting
of each item when a menu or preset menu is
displayed.
With the menu off and the marker on, the image
pattern can be preset with the
and the safety marker area with the ▲ and ▼
switches in the range of 80-99%.
MENU PRESET
SDI CH B F1
VBS
ENT ESC DVI TEST F2
OPT.
7 8
CH B
SDI
VBS
TEST
DVI
OPT.
6 9
(LEFT)/ (RIGHT) switch
and switches
- 3 -
CHROMA BRIGHT CONT AUDIO
MONO ASPECT SCAN
APT SCREEN MARK
PRE.
MANUA L
10 12 13 14
F1
MONO ASPECT SCAN
F2 APT SCREEN MARK
PRE .
MANU AL
11 15 16 17
⑦ INPUT SELECT switch
Use the ▲ and ▼ switches to change input
sources.
※ "OPT" is enabled when an optional module input
is selected.
⑧ CH-B switch
Use this switch to change channels in the SDI or
VBS input mode.
⑨ TEST switch
Press this switch to display internal test signals.
The switching between the following three types
of signals is done each time this switch is pressed.
<Normal Screen>
+2%
-2%
0%
0~100% staircase wave
<Staircase wave with pluge>
24 25 26
CHROMA BRIGHT CONT AUDIO
18 19 20 21
<100% Window>
<Color Bar>