Accessories Supplied; Other Options - HP 4262A Operating And Service Manual

Section I
Paragraphs 1-17 to 1-33
1-17. For information concerning a serial number
prefix that is not listed on the title page or in the
Manual Changes supplement, contact your. nearest
Hewlett-Packard office.
1-18. OPTIONS.
1-19. Options for the Model 4262A LCR Meter
are available for adding the following capabilities:
Option 001: BCD Parallel Data Output.
Option 004: Comparator. A comparator func-
tion providing GO/NO-GO judge-
ment with HIGH and LOW limits
for LCR and D/Q.
Option 101: HP-IB Interface.
Option 010: 100Hz Test Frequency.
(instead of 120Hz)
_ Options 907, 908 or 909 are handle or rack __
mount kits. See paragraph 1-29
for details.
Option 910: Extra Manual.
1-20. OPTION 001.
1-21. The 4262A option 001 provides separate
BCD parallel data output for L, C, R/ESR and
dissipation factor or quality factor simultaneously
from the two rear panel connectors. With this op-
tion, external data processing devices such as a
digital printer can be used with the 4262A.
1-22. OPTION 004.
1-23. The 4262A Option 004 provides for
GO/NO-GO judgement by comparing L, C, R/ESR
and D/Q values to HIGH and LOW limits. Three
judgement outputs are provided: LED lamp dis-
play, relay contacts, or TTL level voltages (open
collectors):
HIGH . .measured value is not less than HIGH
limit.
IN... measured value is less than HIGH limit
and not less than LOW limit.
LOW ...measured value is less than LOW limit.
Model 4262A
1-24. OPTION 101.
1-25. The 4262A Option 101 provides interfac-
ing functions to both transfer L, C, R/ESR and
D/Q data to HP Interface Bus line and to receive
remote control signals from HP Interface Bus line.
1-26. OPTION 010.
1-27. The 4262A Option 010 provides test fre-
quencies of 100Hz, 1kHz, and 10kHz (100Hz is
used instead of standard 120Hz). All other electri-
cal performance is the same as that of standard in-
strument.
1-28. OTHER OPTIONS.
ing:
Option 907: Front Handle Kit.
Option 908: Rack Flange Kit.
1-31. ACCESSORIES SUPPLIED.
1-32. Figure 1-1 shows the HP Model 4262A
LCR Meter, power cord (HP Part No. 8120-1378),
and fuses (HP Part No. 2110-0007 and 2110-0202),
1-33. ACCESSORIES AVAILABLE.
1-34. For effective and easy measurement, three
styles of fixtures and leads for the measurement
of various components are available. These are
listed in Table 1-1.A brief description of each of
these fixtures and leads is given in Table 1-3. Refer
to Section III Figure 3-3 on page 3-8 for detailed
information on these devices.