To Show Both Main And Delayed Sweep Displays - HP 54620A User's And Service Manual

Making Analyzer Measurements

To show both main and delayed sweep displays

To show both main and delayed sweep displays
Press
1
Main/Delayed
Press the softkey.
2
Delayed
The display is divided into a main and delayed sweep. The delayed sweep is
shown in the bottom half and represents the portion of the waveform
indicated by the vertical lines outlining a window in the upper half.
The Time/Div setting for the delayed sweep is independent of the main
sweep, except that it can be no slower than twice the speed of the main
sweep. It is adjusted using the Time/Div knob. Figure 20 shows the Time/Div
indicator for the delayed sweep. If you need to change the Time/Div for the
main sweep, you must change back to Main before using the Time/Div knob.
82
.