Samson Memory Pen - Samson TROVIS 6495 Series Mounting And Operating Instructions

13.3

SAMSON memory pen

Note: The memory pen can only be used when the controller is fitted with a RS-232/USB in-
terface board.
The SAMSON memory pen serves as a data carrier and is able to load and store data in its
non-volatile memory.
The memory pen can be loaded with data configured in TROVIS-VIEW and the settings
transferred to one or several controllers of the same type and version. In the same way, the
memory pen can be used to upload data from the controller allowing you to simply copy the
configuration data from one controller to another controller of the same type and version.
Data transmission between TROVIS-VIEW and memory pen
1. Plug memory pen into the RJ12 jack at the RS-232/USB board of the controller.
The following appears on the display when the controller recognizes the memory pen:
In the top row of the display, the device type whose data is contained on the memory
pen is indicated. You can select wheter the data from the controller are to be uploaded
onto the memory pen or whether the data from the memory pen are to be downloaded
to the controller. If the memory pen contains, for example, data from another device
type, the option to download from the pen does not appear. If the memory pen is
write-protected, the option to upload data does not appear.
2. Select option (
6495 >> Memory pen: Data are uploaded from the controller to the memory pen.
Memory pen >> 6495: Data are downloaded from the memory pen to the controller.
3. Confirm setting (
Data transmission starts.
, ):
).
Interfaces
53
EB 6495-2 EN