Samson Memory Pen; Data Transfer Between Trovis-View And Memory Pen - Samson 5757-7 Mounting And Operating Instructions

Data transmission
8.2

SAMSON memory pen

The SAMSON memory pen serves as a data carrier and is able to load and store data in its
non-volatile memory.
The memory pen can be loaded with data configured in TROVIS-VIEW and the settings
transferred to one or several controllers with electric actuators of the same type and version.
In the same way, the memory pen can be used to upload data from the actuator allowing
you to simply copy the configuration data from one actuator to another actuator of the same
type and version.
On inserting a memory pen that is empty or that contains data from another type of device
or another version of the same device into the serial interface port of the actuator, the data
from the actuator are uploaded to the memory pen regardless of the status of the memory
pen and any other data on the memory pen are overwritten.
Note: Actions and errors of the memory pen are indicated by the yellow LED (see section
2.3)

8.2.1 Data transfer between TROVIS-VIEW and memory pen

1. Plug memory pen (3) together with modular adapter (2) into the serial interface (COM
port) of the PC (1).
Fig. 15 · Connecting PC – memory pen
46
EB 5757-7 EN
3 2 1
1 Serial interface
2 Modular adapter
3 Memory pen