3 Functions of memory pen
The memory pen can be ordered (order no. 1400-9753). Refer to u EB 6661 for more de-
tails.
3.1 Command mode
A memory pen (order no. 1400-9753) can be configured in TROVIS-VIEW to be a com-
mand pen. The command pen allows the actuator stem to be moved to the open and closed
positions.
NOTICE
!
The action of retracting/extending the actuator stem on inserting the command pen has ab-
solute priority. The input signal is overridden.
Î The configuration of the memory pen is explained in u EB 6661.
3.2 Data logging
NOTICE
!
The data logging function is available for electric actuators with firmware 2.x and higher.
The memory pen allows the following data to be saved:
− Pt 1000 input
− Flow rate
− Current input
− Actuator stem position
− Positioning value
− Z component
− P component
− I component
− D component
− Error during operation
− Tapping
KH 5757 EN
Functions of memory pen
13