Configuration Menu - Samson TROVIS 6495 Series Mounting And Operating Instructions

9

Configuration menu

In the configuration menu, the controller is
adapted to its control task by changing indi-
vidual configuration items and parameters.
The configuration menu is subdivided into
various menus and submenus. The
submenus contain the individual configura-
tion items and parameters. Section 15.2 in-
cludes an overview of all possible settings
that can be made.
The Configuration Manual KH 6495-2 EN
contains detailed descriptions on individual
configuration items as well as other helpful
information.
Operation within the configuration level is
performed using the cursor keys, (
enter key ( ) and escape key (
Note: Both the keys on the left and right of
the key panel can be used in the configura-
tion level.
If the controller is to be newly configured,
we recommend keeping the following con-
figuration sequence:
1. Set the control mode, e.g. M.1-1
2. Set the input, e.g. I.1.1-6
3. Assign input to controlled variable, e.g.
C.1.1.1-1
4. Change the set point, e.g. C.2.1.1
5. Determine the control algorithm, e.g.
C.3.1.1
6. Assign the output, e.g. O.1.1-1
7. Set the output signal, e.g. O.1.2-1
8. Set the operating direction, e.g.
O.1.3-1
9. Set the restart condition, e.g. C.4.1-0
Configuration Manual KH 6495-2 EN con-
tains further information.
9.1
The controller is currently in the operating
level:
, ),
Enter the configuration level
).
1x Change to the main menu.
1x Select Configuration menu.
1x Enter Configuration menu.
Configuration menu
Entering the configuration
level
The Operating menu Contr. [1]
is highlighted.
29
EB 6495-2 EN