Man Mode; Operation Using Memory Pen - Samson 3374 Series Mounting And Operating Instructions

8.2.2

MAN mode

The actuator is normally in automatic mode indicated by the
3). In MAN mode, the actuator stem moves to the adjusted manual positioning value. An ac-
tive manual mode is indicated in Code 0 by the
justed in Code 3.
Code Description
2 Operating mode
3 Positioning value (manual mode)

8.3 Operation using memory pen

The memory pen is optional (accessories) and is used to store and transfer data:
Fig. 8-2: Memory pen-64 (order no. 1400-9753)
The memory pen can be configured in TROVIS-VIEW. The following functions for the actuator
can be selected:
− Read data from the memory pen
− Write data to the memory pen
− Time-controlled data logging
− Event-triggered data logging
− Command mode
Refer to the operating instructions for TROVIS-VIEW for details on how to configure the mem-
ory pen:
u EB 6661.
EB 8331-4 EN
icon (displayed in Code 0 to
icon. The positioning value can be ad-
WE Adjustment range
AUTO AUTO (automatic mode)
MAN (manual mode)
– 0.0 to 100.0 %
Operation
8-5