Samson TROVIS 6495 Series Mounting And Operating Instructions page 58

Setting and operation with TROVIS-VIEW software
3. In Options menu, select Language to
change the interface language.
Note: Unhighlighted languages are not
available and cannot be selected.
You can select a different language at
any time. TROVIS-VIEW switches di-
rectly to the selected language.
4. If required, create the TROVIS-VIEW file
name in Options menu from the type,
date and selectable parameters. The file
name created in this way can be pre-
viewed before saving it (e.g. VIEW3_
6495_2009-June-23.tro).
5. If required, add a new or additional
TROVIS-VIEW module by selecting Add
module in Options menu. Enter the CD
key (written on the installation
CD-ROM) in the opened window.
6. If required, select Customer data in Edit
menu to enter data relevant to the plant,
e.g. project name, plant location, oper-
ator..
7. If required, select Load Factory Defaults
in Edit menu if you want to load default
settings (see configuration list, section
15.2) onto the operator interface.
58
EB 6495-2 EN