Operation Using Memory Pen - Samson 5857 Mounting And Operating Instructions

Operation

8.4 Operation using memory pen

See u EB 6661.
The memory pen can be loaded with data configured in TROVIS-VIEW and the configuration
data transferred to one or several devices of the same type and version.
Additionally, the data from the device can be written to the memory pen. This allows the con-
figuration data to be simply copied from one device and loaded onto other devices of the
same type and version.
The data logging function also allows operating data to be recorded.
Note
On inserting a memory pen that is empty or that contains data from another type of device
or another version of the same device into the serial interface port of the actuator, the data
from the actuator are uploaded to the memory pen regardless of the status of the memory
pen and any other data on the memory pen will be overwritten.
LED blinking pattern for the memory pen
Memory pen actions and errors are indicated at the yellow LED on the actuator.
− Memory pen action completed
− Preparing to read data from memory
pen
− Preparing to write data to memory pen
8-6
On
Off
On
Off
On
Off
Time in s
Time in s
Time in s
EB 5857 EN