Samson Memory Pen - Samson 5824 Mounting And Operating Instructions

Transfer data

10.2 SAMSON memory pen

The memory pen can be loaded with data configured in TROVIS-VIEW and the configuration
data transferred to one or several devices of the same type and version.
Additionally, the data from the device can be written to the memory pen. This allows the con-
figuration data to be simply copied from one device and loaded onto other devices of the
same type and version.
The data logging function also allows operating data to be recorded. Refer to section 10.2.4.
Note
On inserting a memory pen that is empty or that contains data from another type of device
or another version of the same device into the serial interface port of the actuator, the data
from the actuator are uploaded to the memory pen regardless of the status of the memory
pen and any other data on the memory pen will be overwritten.
Memory pen actions and errors are indicated at the yellow LED on the actuator.
Memory pen action completed:
On
Off
Preparing to read data from memory pen (see section 10.2.2):
On
Off
1
Preparing to write data to memory pen (see section 10.2.2):
On
Off
1.2
64
2 3 4
2.4 3.6 4.8
5 6 Time [s]
7.2 Time [s]
6.0
Time [s]
EB 5824-2 EN