Memory Pen - Samson 3374 Mounting And Operating Instructions

16 Memory pen

The memory pen is optional (accessories) and is used to store and transfer data:
− Memory pen-64 (order no. 1400-9753)
The memory pen can be configured in TROVIS-VIEW. The following functions for the
Type 3374 Actuator can be selected:
− Read data from the memory pen
− Write data to the memory pen
− Time-controlled data logging
− Event-triggered data logging
Refer to the operating instructions for TROVIS-VIEW for details on how to configure the mem-
ory pen:
EB 6661
u
Using the memory pen
1. Open the actuator cover.
2. Insert the memory pen into the serial interface of the actuator.
Ö The actuator automatically recognizes the memory pen. The dialog for the memory pen
appears on the display. The function configured in TROVIS-VIEW is represented by a
code on the display (see Table 4).
3. Select the required action using the rotary pushbutton (depending on the function select-
ed. See Table 4).
Ö OK appears on the display after data transmission is completed.
4. Remove memory pen after data transmission is completed.
Ö The memory pen dialog ends. The start screen appears.
Close the actuator cover.
EB 8331-4 EN
Memory pen
57