Appendix
Device safety
Electromagnetic compatibility
Relative humidity
Electrical connection
Display
Display range
Total delay time
Configuration
Control modes
Weight
72
EB 6495-2 EN
According to EN 61010-1: Class of protection II
Requirements according to EN 61000-6-2,
EN 61000-6-3 and EN 61326-1
Max. 95 %, non-condensing
Plug-on screw terminals 1.5 mm² (0.5 to 1.5 mm² wire
cross-section)
Dot matrix display with 132 x 49 pixels
–999 to 9999; start value, end value and decimal
separator can be selected
100 ms
Functions saved in read-only memory, configuration
saved in non-volatile memory
One or two fixed set point/follow-up control
One ratio control
One cascade control
One ratio and fixed set point/follow-up control
One override control
0.5 kg
Overvoltage category II
Degree of contamination 2