Setting And Operation With Trovis-View Software - Samson TROVIS 6495 Series Mounting And Operating Instructions

14

Setting and operation with TROVIS-VIEW software

14.1 General
The TROVIS-VIEW software allows various smart SAMSON devices to be configured over a
common operator interface. It consists of the operator interface, communication server and
the device-specific module. The software has a Windows
The entire configuration of the TROVIS 6495-2 Industrial Controller can be performed over
the TROVIS-VIEW Configuration and Operator Interface.
The TROVIS-VIEW software including CD key is delivered on a CD-ROM (order number
6661-1033).
Software updates are available on the Internet (http://www.samson.de) in Services > Sup-
port and downloads.
Note: The following instructions include a description on the key functions of the
TROVIS-VIEW software in conjunction with the TROVIS 6495-2 Industrial Controller. Refer to
the online help in the ? menu for a detailed description.
14.1.1 System requirements
Hardware
4
PC with Pentium II processor or equivalent (300 MHz or higher), 500 MHz recommended
4
Serial interface or USB/RS-232 adapter
4
Min. 96 MB RAM, 192 MB RAM recommended
4
Min. 150 MB free hard disk space plus approx. 15 to 20 MB additional hard disk space
per SAMSON module
4
SVGA graphic card (min. 800 x 600)
4
CD-ROM drive
Software
4
Operating system: Windows
®
Windows 7
4
Microsoft ® .NET Framework Version 2.0 or higher (included on the installation CD-ROM)
4
Internet browser: Microsoft
4
®
Adobe Reader
®
2000 (min. SP2), Windows
®
Internet Explorer or Firefox
®
Setting and operation with TROVIS-VIEW software
® Explorer look and feel.
®
XP, Windows
®
Vista,
55
EB 6495-2 EN