Samson TROVIS 6495 Series Mounting And Operating Instructions page 28

Configuration level
←
-------------------
→
Operating level Op. menu
Controller [1]
2x
Configuration
28
EB 6495-2 EN
←
-------------------------------------
2x
→
M Control mode
I Input
1C Controller [1]
2C Controller [2]
O Output
D Communication
A General settings
←
Configuring the controller,
see section 9.2
→
Setting the control mode
→
This menu contains the configura-
tion of analog inputs AI1 to AI4
and digital inputs DI1 to DI4. See
sec. 15.2 for details.
→
These menus contain the configura-
tion of the controller settings for
Controller [1] and Controller [2] as
→
well as input variables, set points,
control functions, restart condition,
controller display and key locking.
See section 15.2 for details.
→
This menu contains the configura-
tion of analog outputs AO1 to AO3
and digital inputs DO1 to DO6. See
section 15.2 for details.
→
This menu contains the configura-
tion of interfaces. See section 15.2
for details.
→
This menu contains the configura-
tion of languages, operation dis-
play, operator keys and network
frequency. In addition, the key
number can be entered, a user cali-
bration of the analog inputs and
outputs can be performed and the
controller can be reset to the de-
fault settings. See section 15.2 for
more details.