Interfaces - Samson TROVIS 6495 Series Mounting And Operating Instructions

Interfaces

13 Interfaces
The TROVIS 6495-2 Controller is equipped with an infrared interace. In addition, it can be
fitted with one of two optional interface boards. Data can be transferred between
TROVIS-VIEW and the Controller over the interfaces. Refer to section 14.5.
4
Infrared interface:
4
RS-232/USB interface board :
4
RS-485/USB interface board:
TROVIS 6495
1 RJ12 jack (RS-232/USB interface board)
2 Infrared interface
3 USB interface (RS-232/USB and RS-485/USB
interface boards)
4 USB cable (mini-B, 5-pin – USB type A)
5 Infrared adapter (RS-232)
6 Connecting cable RJ12/D-sub 9-pin (RS-232)
7 Memory pen (RS-232), only in combination with
RS-232/USB interface board
8 Modular adapter RJ12/D-sub 9-pin (RS-232)
9 COM port (RS-232) on the computer
10 USB port on the computer
Note: By using the USB 1.1 serial adapter, the USB port of the computer can be used in place of the COM port
(RS-232) when Windows
Fig. 4 · Data transmission
48
EB 6495-2 EN
Infrared adapter (RS-232)
Connecting cable RJ12/D-sub 9-pin (RS-232)
or
USB cable (5-pin mini-B – USB type A)
USB cable (5-pin mini-B – USB type A)
1
2
3
® ®
2000, Windows XP, Windows
8
7
6
5
4
USB 1.1 serial adapter
Note: The order numbers for the accessories
are listed in section 2.2.
® ®
Vista or Windows
9
7 is installed on the computer.
10