Unpacking The Detector; Damaged Packaging - Agilent Technologies 1200 Infinity Series User Manual

3
Installing the Detector

Unpacking the Detector

Unpacking the Detector

Condensation within the detector
C A U T I O N
Condensation will damage the system electronics.
➔
➔

Damaged Packaging

If the delivery packaging shows signs of external damage, please call your
Agilent Technologies sales and service office immediately. Inform your
service representative that the instrument may have been damaged during
shipment.
"Defective on arrival" problems
C A U T I O N
If there are signs of damage, please do not attempt to install the module. Inspection by
Agilent is required to evaluate if the instrument is in good condition or damaged.
➔
➔
34
Do not store, ship or use your detector under conditions where temperature
fluctuations could cause condensation within the detector.
If your detector was shipped in cold weather, leave it in its box and allow it to warm
up slowly to room temperature to avoid condensation.
Notify your Agilent sales and service office about the damage.
An Agilent service representative will inspect the instrument at your site and
initiate appropriate actions.
Agilent 1200 Infinity Series VWD - User Manual